Tektronix 240 user manual Turning on and off the startup, What next?

Getting Set Up 2

Turning on and off the startup page

You can enable and disable the startup page by sending utility files from the printer’s utilities diskette to the printer. For details on controlling the startup page, refer to the Phaser 240 Drivers and Utilities Printing Reference.

Even when the startup page is enabled, you can still keep it from printing by removing the paper tray(s) at power-up. Put the paper tray(s) back in after the READY light stops blinking.

What next?

■Once you have set up all the hardware and connectors, installed any options, installed the software on your computer, and turned on the power, you are ready to print. Chapter 3, “Printing,” contains useful information on printing features such as color corrections, fonts, and printing hints. For detailed information on printing options, refer to Phaser 240 Drivers and Utilities Printing Reference.

User Manual 2-35