Tektronix 240 user manual 9238-27

4Caring for Your Printer

8.Slide the paper tray (containing the cleaning tray) into the slot. If your printer has a Lower Tray Assembly, slide the tray into the lower slot.

9.Press the TEST button on the back of the printer for 3 seconds. The printer attempts to load paper, bringing the paper-pick rollers in contact with the alcohol-dampened pad in the cleaning tray.

10.The JAM indicator blinks, indicating that the rollers have been cleaned.

a.If your printer has a single paper tray, the procedure is complete. Slide out the paper tray, remove the cleaning tray, and replace the paper or transparencies. Slide the paper tray back into the slot. If paper-picking problems occur, repeat this cleaning procedure.

b.If your printer has a Lower Tray Assembly, pull out the paper tray a few inches and then push it back in to clear the JAM indicator. Then perform the steps on the next page to complete the procedure.

SECOND TEST FEEDER SWITCH

. . . . . . . . .

10

ERROR JAM MEDIA

9

8

9238-27

4-8 Phaser 240 Color Printer