Tektronix 240 user manual At a glance, Setting up the printer, Connecting the printer

Chapter

2 Getting Set Up

At a glance

To install your printer, perform the steps listed here. The following pages provide detailed installation instructions. If you used the pictorial installation instructions, you have already performed Steps 1 and 2. Begin with Step 3; turn to “Installing a driver on your computer” on page 2-23.

1.Setting up the printer

Putting all the pieces together: unpacking the printer and accessories, checking the inventory, removing the packing material, installing the optional Lower Tray Assembly, loading the transfer roll, loading the paper tray(s), setting the media switch for paper or transparencies, and installing memory, font or Ethernet options.

2.Connecting the printer

Connecting all necessary cables and turning on the printer.

3.Installing a driver on your computer

Using the Phaser 240 diskettes to install a driver on your computer (Macintosh or Windows).

4.Setting up computer ports

User Manual 2-1