6. Remove the screws that secure the I/O panel to the I/O panel cage.
7. Remove the I/O panel from the I/O panel cage.
Installing the Input/Output (I/O) Panel1. Replace the I/O panel in the I/O panel cage.
2. Tighten the screws to secure the I/O panel to the I/O panel cage.
3. Connect the cables to the I/O panel.
4. Place the USB 3.0 module in its slot.
5. Tighten the screws that secure the USB 3.0 module to the I/O panel cage.
6. Replace the I/O panel cage into its slot.
7. Tighten the screws that secure I/O panel cage to the chassis.
8. Install:
a. front bezel
b. computer cover
9. Follow the procedures in After Working Inside Your Computer.
Removing the Memory Shroud1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
23