Option Description
NOTE: SATA is configured to
support RAID mode. No SATA
operation support in Tower 7910.
Tower 7910 Allows you to configure the internal SATA hard-drive controller.
The options are:
• Disabled
• ATA
•AHCI (Default)
NOTE: SATA is configured to support RAID mode. No SATA
operation support in Tower 7910.
Drives
Tower 5810 and Tower 7810 Allows you to configure the SATA drives on board. The options
are:
• HDD–0
• HDD–1
• HDD–2
• HDD–3
• ODD–0
• ODD–1
Default Setting: All drives are enabled.
NOTE: If the hard drives are connected to a RAID controller
card, the hard drives will display {none} in all the fields. The
hard drives can be seen in the RAID controller card BIOS.
Tower 7910 • SATA–0
• SATA–1
Default Setting: All drives are enabled.
NOTE: If the hard drives are connected to a RAID controller
card, the hard drives will display {none} in all the fields. The
hard drives can be seen in the RAID controller card BIOS.
SMART Reporting This field controls if the hard drive errors for the integrated
drives are reported during system startup. This technology is
part of the SMART (Self Monitoring Analysis and Reporting
Technology) specification.
•Enable SMART Reporting - This option is disabled by default.
USB Configuration Allows you to enable or disable the internal USB configuration.
The options are:
• Enable Boot Support
• Enable Front USB Ports
• Enable internal USB ports
• Enable rear USB Ports
46