Tektronix 240 user manual Startup, When the printer is ready for operation

2Getting Set Up

Startup page

The startup page contains information on printer configuration and error messages. The printer produces a startup page when you turn on the printer and self-tests run successfully, if the startup page is enabled (default setting).

The printer takes from 60 to 90 seconds to print the startup page, depending on the type of transfer roll installed. The READY indicator blinks while the startup page is printing.

The startup page can be enabled and disabled by sending a utility file to the printer from the printer’s utilities diskettes. For information, refer to the Phaser 240 Drivers and Utilities Printing Reference.

Note After the startup page prints, a registration page prints if the printer has made between six and eight prints since it was built. If you have not already registered your printer, please do so by filling out this page and sending it in.

When the printer is ready for operation

When the power-up sequence is complete, both the POWER and READY indicators remain on, indicating that the printer is ready for operation.

2-22Phaser 240 Color Printer