Tektronix 240 user manual PC and workstation users, Printing a startup

Modifying Printer Operations B

PC and workstation users

■Use the STARTPG.PS file to enable printing of the printer’s startup page.

■Use the NOSTRTGP.PS file to stop the printer from printing a startup page.

1.Locate the start page files in the PHSR240 directory on the Windows 3.1 Driver and Printer Utilities diskette.

2.Copy the files to your hard disk, or use the files from the diskette.

3.Use one of the following methods to send the desired file to the printer:

■PC users: Use the DOS COPY command, described on page 3-19, to send a file to the printer.

Or, use the Copy command in Windows File Manager, described on page 3-20, to send a file to the printer.

■Workstation users: Send a file to the printer as you would any PostScript file.

Printing a startup page

Follow these steps to print a copy of the printer’s startup page:

1.Enable the startup page if it is not already enabled.

2.Turn the printer’s power switch off then back on.

Or, reset the printer according to instructions on page 8-23.

Printing Reference B-3