Tektronix 240 user manual Decompressing the fonts, Installing the decompressed fonts

7Using Fonts

Decompressing the fonts

Note Do not decompress fonts directly into the System Folder; they must be properly installed after they have been decompressed onto your hard disk.

1.Insert the Macintosh Driver and Printer Utilities diskette into your computer's disk drive.

2.Double-click on the Phaser ScreenFonts.sea archive file.

3.At the Self-Extracting Archive dialog box, click Continue.

4.In the dialog box, select the drive where you want the decompressed fonts saved.

5.At the prompt Install software as: you are asked to name the folder where you want the decompressed fonts to reside. Use either the default folder name listed in the edit box or type in the name you want for the folder. Then click Save.

6.At the Installation was successful dialog box, click Quit. The decompressed fonts are saved in the folder you specified.

Installing the decompressed fonts

If you are using System Software 6.0.7:

Use the Font/DA Mover (located on your Apple system software diskettes) to install the fonts you want from the Phaser Screen Fonts suitcase.

If you are using System Software 7.0 and later:

Drag the fonts you want from the Phaser Screen Fonts suitcase to the closed System Folder icon. At the alert message, click OK; the fonts are automatically installed in the proper place.

Select the printer font you want to use within an application and see the same font on the screen.

7-4 Phaser 240 Drivers and Utilities