Tektronix 240 user manual Connecting the power and turning on the printer

Getting Set Up 2

Connecting the power and turning on the printer

After you have connected all the interface cables, you are ready to connect the power cord and turn on the printer.

Caution To avoid damaging the printer, make sure that the voltage select switch is set to match the AC line voltage for your location and that the power switch is in the off position before connecting the power cord.

If you move the printer to a location that uses a line voltage other than the printer’s current setting, refer to “Changing the line voltage” on page C-1 for information on changing the line voltage selection switch.

1.Plug the power cord into the printer and into a grounded outlet.

2.Turn on the printer.

1

1

POWER
OFF	ON
	2

9238-17

User Manual 2-19