Tektronix user manual Using Phaser 240 GX Driver, System requirements

Appendix

A Using the

Phaser 240 GX Driver

If you are using a Macintosh with QuickDraw GX and System Software 7.5, use the Phaser 240 GX driver to print to your Phaser 240 printer.

■The Phaser 240 GX driver works with QuickDraw GX applications and with non-QuickDraw GX applications.

■QuickDraw GX doesn’t work with non-QuickDraw GX printer drivers. If you want to print from non-QuickDraw GX applications with the Tektronix Phaser 240 driver (based on the LaserWriter 7.1.2. printer driver) described in Chapter 2, you must disable QuickDraw GX; see page A-21 for instructions.

System requirements

The Tektronix Phaser 240 GX printer driver requires the following hardware and software:

■An Apple Macintosh II computer, or later

■At least 8 Mbytes of RAM

■QuickDraw GX and System Software version 7.5

Printing Reference A-1