Tektronix 240 user manual Choose Download PostScript File from the Utilities menu

Modifying Printer Operations B

To designate the zone on EtherTalk, use the Set EtherTalk Zone file. You must edit this file.

1.Follow the instructions on page 2-13 to decompress the Phaser 240 Utilities.sea archive file on the Macintosh Driver and Printer Utilities diskette to your computer’s hard disk.

2.View the Set EtherTalk Zone file in TeachText or SimpleText.

3.Replace the name within the parentheses (My Zone Name) with the name of the EtherTalk zone your printer is in.

4.Save the file and quit the application.

5.Select the appropriate printer in the Chooser.

6.Locate the LaserWriter Utility in the folder on your hard disk containing decompressed utility files.

7.Double–click the LaserWriter Utility icon to start the application.

8.Choose Download PostScript File from the Utilities menu.

9.Select the Set EtherTalk Zone file from the list, then click Open.

10.At the prompt Save PostScript output as: you are asked for a file name for saving printer output. Use either the default name given in the edit box or type a new name. Click Save to send the file to the printer.

11.If no output is returned by the printer, the LaserWriter Utility displays a dialog box. Click OK in the box to continue.

Printing Reference B-7