Tektronix 240 user manual Selecting media trays, Upper Tray, Lower Tray, Auto Select

5Selecting Media and Image Options

Selecting media trays

If your printer has the optional lower tray assembly, use one of the methods in the following table to select a media tray.

Options	Tektronix	Downloadable
	driver settings	utility files
Use the upper media tray	✔	✔
Use the lower media tray	✔	✔
Automatically switch between media trays	✔	✔

The Phaser 240 printer comes standard with one perforated-paper tray for metric or U.S. paper sizes. A lower tray assembly can be added and other tray types can be used (call the Tektronix Graphics Supplies Order Desk at 1-800-835-6100).

Note Selecting a tray from a driver overrides a downloaded utility file for prints made from the driver.

■Upper Tray

Paper or transparency film is automatically loaded from the upper tray. The printer picks media from the upper tray until the tray is empty. When the tray is empty, printing stops until the tray is refilled. Use this selection if you use different media in each tray.

■Lower Tray

Paper or transparency film is automatically loaded from the lower tray. The printer picks media from the lower tray until the tray is empty. When the tray is empty, printing stops until the tray is refilled. Use this selection if you use different media in each tray.

■Auto Select

If both trays contain the same size and type of media, media is automatically loaded first from the lower tray, and then from the upper tray when the lower tray is empty. Use this selection if you have the same size and type of media in both trays.

5-6 Phaser 240 Drivers and Utilities