Tektronix user manual Installing the Phaser 240 GX printer driver

AUsing the Phaser 240 GX Driver

Installing the Phaser 240 GX printer driver

1.Make sure your Macintosh is turned on with QuickDraw GX and system software version 7.5 installed.

2.Insert the Macintosh Driver and Printer Utilities diskette into the disk drive.

3.When the diskette appears on the desktop, it should be open showing the icons inside.

4.Drag the Phaser 240 GX driver icon from the diskette to the closed System Folder icon on your Macintosh hard disk. At the alert message, click OK to automatically install the driver in the Extensions folder.

5.Store the printer diskette in a safe place.

Note Before you can print, you need to create a desktop printer; go on to page A-3 for instructions.

A-2Phaser 240 Drivers and Utilities