Tektronix 240 user manual Getting Set Up

Getting Set Up 2

b.If you have the standard 17 fonts, select Tek Phaser 240 (TekColor) 17.

If you have the optional font upgrade (Tektronix order number 4681F1F) with 22 additional fonts (a total of 39 fonts), select Tek Phaser 240 (TekColor) 39.

Note If the printer has the font upgrade, you must install the

Tek Phaser 240 (TekColor) 39 driver for Windows to recognize and use all of the printer’s fonts.

If you select Tek Phaser 240 (TekColor) 39 and you only have the standard 17 printer fonts, any of the additional fonts selected within an application are printed in the Courier font.

c.Click OK. The driver software you need is automatically installed.

Note The printer’s configuration page contains the information you need to set up the printer port. For information on printing a configuration page, see “Printing the configuration page” on page 6-13.

7.Assign the printer to a port:

a.Select the printer from the list of Installed Printers.

b.Click Set As Default Printer if you want this printer to be the default.

c.Click Connect to display the Connect dialog box.

d.In the Connect dialog box, set the Transmission Retry value to 850. Refer to your Windows documentation for details.

User Manual 2-25