Tektronix 240 user manual Adding paper or transparencies

Getting Set Up 2

Adding paper or transparencies

Unpack the paper tray. Be sure to remove all adhesive tape.

Note The printer uses a different paper tray for each paper size (Letter, Letter-perforated, A4, A4-perforated). The trays are not adjustable.

1.If you are using a tray for perforated paper or transparencies, set the selection switch on the tray (1) for paper or transparencies. Trays for non-perforated plain paper do not have this switch.

1

9238-06

2.Make sure that the metal plate is all the way down. If necessary, push the metal plate down until it clicks into place. Do not attempt to change the position of the vertical tab (3) at the back of the paper tray.

32

9238-07

User Manual 2-9