Tektronix 240 user manual Install the transfer roll

2Getting Set Up

Install the transfer roll

Note ColorCoat™ transfer rolls are used with common laser paper and perforated premium laser paper; Black and 3-Color transfer rolls are used with Tektronix transparencies and thermal-transfer paper.

With the top cover still open, install the transfer roll:

1.Remove the transfer roll from the box. Remove the shipping foam from the transfer roll. Remove the foam clip from the full end of the roll.

2.Hold the transfer roll so that the black band on the roll is on your left.

3.With the black band on the roll to your left, place the empty end of the roll in the slots at the front of the printer.

4.Place the full end of the roll in the slots at the back of the printer.

5.Turn the full end of the roll to remove slack.

6.Close the cover.

5

4

2 3

9238-05

2-8 Phaser 240 Color Printer