Tektronix 240 user manual PC and workstation users, PC color correction Utility file name

6Using Color

PC and workstation users

1.Copy the color sampler chart files you want to use from the SAMPLERS directory on the Windows 3.1 Driver and Printer Utilities diskette onto your computer’s hard disk. You may want to place these files in a Utilities directory. Or, you can print these files directly from the diskette.

2.Make sure the printer is loaded with the type of paper and transfer roll you want to use for printing the chart.

3.Select a color correction from the following table:

PC color correction		Notes
utility file name
■	DISPLAY.PS	The downloadable color correction utility files
■	VIVDCOLR.PS	operate only in conjunction with the printer’s
■	SIMPRESS.PS	switches; see page 6-8for details.

■NOCORECT.PS

■PC users: Use the DOS COPY command, described on page 3-19, to send a color correction utility file to the printer.

Or, use the Copy command in Windows File Manager, described on page 3-20, to send a color correction utility file to the printer.

■Workstation users: Send a color correction file to the printer as you would any PostScript file.

4.Select a print quality mode from the following table, then repeat Step 2 for downloading the utility file to the printer.

PC print quality mode utility file

■STANDARD.PS

■ENHANCED.PS

■HIGHRES.PS

6-20Phaser 240 Drivers and Utilities