16
Setting Up the Remote for On-Screen Control
FUNCTION
USERSUBINPUT
SOUND
()0pP=+
PUSH
ENTER

Mm

Â

µ

º‚
¢
¢
¢
¢
≠±
·
∏π
¢
¢
¢
¢

Mm

Â

µ

SETUP
Blank
area
IR emitter
How to use the remote
The supplied remote lets you perform almost all of the
receiver operations.
This section describes how to use the direction control
button. For certain operations, you can also control the
receiver using the other (short-cut) buttons instead of
the direction control button.
For details, see page 52.
1Press the direction control button on the remote
once to recall the on-screen display.
2Press repeatedly (or hold down) the corner of the
direction control button (M, m, Â, µ) in the
direction you want to move the pointer (hand-
shaped icon) on the on-screen display.
3To “click” on an item, position the pointer so that
it is on one of the on-screen items, then press and
quickly release the center of the direction control
button (indicated by “PUSH ENTER”).
To make the on-screen display disappear
Position the pointer in the blank area, and press the center of
the direction control button.
• For USA and Canada : You can also turn the on-screen
display on or off by pressing GUI.
Direction
control
button
Direction
control
button
Notes on handling the remote (except for USA and
Canada)
• Do not cover the IR emitter on the remote when operating
the remote.
• Hold the remote with its direction control button facing
up, as shown below.
Pointer
For USA and Canada For other countries

30°