Sony STR-D760Z, STR-DE815G Speaker System Hookups, Speaker placement for STR-DE1015G

Hooking Up the System

Speaker System Hookups

Although front (left and right) speakers are required, center and rear speakers are required only for enjoying surround sound.

What cords will I need?

Speaker cord (not supplied)

(+)	(+)
(–)	(–)

Twist the stripped ends of the cord about 2/3 inch (15 mm). Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords are reversed, the sound will be distorted and will lack bass.

Rear	Rear			Center
speaker (L)	speaker (R)	Receiver		speaker
		SURROUND SPEAKERS
		R	REAR L CENTER
		+		+
		-		-
		R	L
			IMPEDAMCE USE 8-16Ω

Speaker placement for STR-DE1015G

Normally, to obtain the best possible surround sound all speakers should be placed the same distance from your listening position (A).

This unit, however, allows you to place the center speaker closer (B), so that is lines up with the front speakers. The rear speakers can also be placed closer (C), according to the shape of your room.

If you feel that this placement reduces the surround effects, you can adjust the center and rear delay parameters to obtain the effect you desire (see page 39).

Note

To take full advantage of Dolby Digital (AC-3) surround effects we reccommend using high quality speakers. We also reccommend using front, center, and rear speakers that are of the same size and quality.

B

A A

45°

C C

90°

20°

Notes

	WOOFER
	AUDIO
	OUT
Front speaker (R)
+	-	-
A
R	-	-
+
B
	USE IMPEDANCE 4-16Ω
	FRONT	SPEAKERS

IMPEDANCE

SELECTOR

Front speaker (L)

+

A

L

+

B

•Do not place the center or rear speakers father away from the listening position than the front speakers.

•When mounting the rear speakers on side walls perpendicular to the listening position they should be placed 60 - 90 cm (24 - 35 inches) above the listening position (as shown in “Speaker placement for STR- DE815G and STR-D760Z” on page 10).

9