Manuals / Brands / Home Audio / Stereo Receiver / Sony / Home Audio / Stereo Receiver

Sony STR-D760Z, STR-DE1015G, STR-DE815G, STR-D760Z, STR-DE815G Tuning Radio Stations

1 68

Download 68 pages, 1.11 Mb

54

Front Panel Operations (Remote Short-cuts: USA and Canada only)

nA1˜A2˜...A9˜A0˜B1˜B2˜...B9˜B0N

nC0˜C9...C2˜C1N

Selecting a component directly from the

remote control (USA and Canada only)

1Press one of the SYSTEM CONTROL FUNCTION

buttons to select the component you want to use.

The receiver and the selected component turn on.

The SYSTEM CONTROL FUNCTION buttons on

the remote are factory-set as follows:

To listen to or watch Press*

Records PHONO

Radio programs TUNER

Compact Discs (CD) CD

Digital Audio Tapes (DAT) DAT/MD

or MiniDiscs (MD)

Audio tapes TAPE

TV programs or video tapes VIDEO 1, VIDEO 2

or VIDEO 3

Laser discs/DVD LD/DVD

Digital program sources INPUT MODE

(STR-DE1015G only)

Decoded AC-3 programs 5.1 INPUT

(STR-DE815G / D760Z only)

* “NO CONNECTION” is displayed if you select a

function that was set to “NO” in the FUNCTION set

up menu (see page 58 or 59).

If the component does not turn on

Press the power switch on the component.

2Start playing.

Refer to “Remote Descriptions” on page 52 for

details.

To turn off the components

Press SYSTEM OFF. This will also turn off the video and

audio components connected to the SWITCHED AC

OUTLETs on the back of this unit at the same time.

Tuning Radio Stations

The receiver lets you tune a station by scanning

stations (Automatic Tuning), and by selecting preset

stations (Preset Tuning).

For the on-screen operations, see pages 29 to 30.

1Press AUDIO FUNCTION repeatedly to display

“TUNER,” then press FM/AM to select FM or

AM.

2Press DISPLAY so that the frequency appears.

3Press TUNING + or –.

The frequency indication changes and scanning

stops when the receiver tunes in a station. To

continue scanning, press + or – again. Press + for

a higher station number; press – for a lower one.

Tuning preset stations (Preset Tuning)

1Press AUDIO FUNCTION repeatedly to display

“TUNER”.

2Press SHIFT to select a memory page (A, B or C).

3Press PRESET TUNING + or – repeatedly to select

the station you want. Each time you press the

buttons, the preset numbers change as follows:

Note

If the AC power cord is disconnected for about 1 week, the

preset stations will be cleared. Preset the stations again.

Contents

Main WARNING INFORMATION CAUTION Note to CATV system installer Owners record z Table of contents Getting Started On-Screen Operations Front Panel Operations Welcome! Understanding How the Receiver Works About the color system for video input Hookup Overview Before you get started Antenna Hookups Connecting an outdoor antenna Infrared (IR) Repeater Hookups Audio Component Hookups z Speaker System Hookups Speaker placement for STR-DE1015G Speaker placement for STR-DE815G and STR-D760Z z Selecting the speaker system Selecting the impedance (except for Singaporian models) TV-VCR Hookups c LD/DVD (to LD or DVD player) Note for STR-DE815G and STR-D760Z d TV/DBS* (to TV tuner or Digital Broadcasting Satellites (DBS) receiver) e VIDEO 3 INPUT (to a video camera or a video game) z (for USA and Canada only) Playing decoded Dolby Digital (AC-3) soundtracks (STR-DE815G and STR-D760Z) Digital Component Hookups (STR-DE1015G only) AC Hookups Setting the voltage selector (only on the models supplied with the voltage selector) Connecting the AC power cord Before using for the first time 1 2 b Inserting batteries into the remote (USA and Canada) Inserting batteries into the remote (other countries) 1 2 Notes on the remote How to use the remote 30 1 2 3 Registering a TV (or Monitor) IR code registration is unnecessary in the following case 3 Registering IR codes 1 2 7 8 Erasing TV IR codes Registering IR codes 1 2 3 Registering Audio and Video Components IR code registration is unnecessary in the following case 5 6 7 To return to the main menu To return to a previous menu Erasing IR codes To erase all the IR codes for the current component (e.g., OTHER CD) To erase all the IR codes Dolby Digital (AC-3) (STR-DE1015G only) Specifying the speaker type 1 2 3 type of speakers you connected. Front speaker (FRONT) Adjusting the speaker volume Use the remote while seated in your listening position to adjust the volume of each speaker. 1 2 3 You will hear the test tone from each speaker in sequence. Dolby Pro Logic (STR-DE815G and STR-D760Z) Specifying the center mode Adjusting the speaker volume 1 2 Dolby Pro Logic Surround SetupDolby Surround Setup 3 4 5 6 Selecting a Component 1 2 3 4 To turn off the selected component To turn off all components To mute the sound To listen to digital program sources (STR-DE1015G) To listen to decoded Dolby Digital (AC-3) program sources (STR-DE815/D760Z) Watching TV or Video Programs 1 2 Getting StartedPlayback/Recording Tuning and Presetting Radio Stations + + 2 3 4 Tuning preset stations (Preset Tuning) 3 + Presetting the radio stations + Recording p Recording to audio tape or MD 1 2 3 4 5 6 p Recording other components to video tape 1 2 3 4 5 6 Using the Pre-programmed Sound Fields Page Sound fields for STR-DE815G and STR-D760Z Genre Mode Surround effect Selecting the sound fields main menu. See Sound fields. . . charts on pages 33 and 35. p STR-DE1015G p STR-DE815G and STR-D760Z To turn off the sound fields Customizing the Sound Fields EQ C LEV* R (BAL/LEV)*/W LEV* LFE MIX/D.COMP WALL/SEAT (F-R/L-R)/REV EFFECT MODE GENRE Adjusting the equalizer parameter (STR-DE1015G) MODE REAR CENTER DELAY Adjusting the tone parameter (STR-DE815G and STR-D760Z) 3 4 2 ++ Adjusting the delay time (STR-DE1015G) 4 THEATER EXIT 5 SHORT, LONG, etc.,) to adjust the parameter. 4 To reset the delay time to the factory settings Click STANDARD. Adjusting surround sound parameters (except for delay time) main menu to display the SOUND FIELD SELECT menu. Page Registering Desired Components (User IR setting) 2 3 4 5 Indexing 2 3 Starting a Component Automatically at Power On (Auto Start) 2 Playing Components Automatically (Auto Play) 2 Starting Several Components in Sequence Automatically (Macro Play) Setting the sequence of IR codes 2 3 4 Changing the Display Settings Selecting the display parameters 2 Adjusting the Sensitivity of the Remote 2 Adjusting the position of the on-screen display 2 3 Using the Sleep Timer 2 Operating a CD Changer Downloading the CD name data in a Sony CD changer with a CTRL A1 jack 2 Indexing a CD (continued) Space bar 1 INDEX. Searching for a CD quickly 3 Front Panel Descriptions 1 @ @ !@@ !@ !!!!!@@ !!0532 6 894 7 Remote Descriptions Selecting a Component 1 2 Playing audio and video components at the same time 1 2 Tuning Radio Stations 1 2 3 Tuning preset stations (Preset Tuning) 1 2 3 Recording 1 2 3 Digital Recording (STR-DE1015G only) Surround (SUR) parameters (STR-DE1015G) 5 To adjust the tone parameters (STR-DE815G / D760Z) 2 5 Customizing the Receiver Operations 1 2 5 6 Set up parameters (STR-DE1015G) Indexing 1 2 3 4 Playing Audio Components Without the TV (Flasher) (except for USA and Canada) 1 2 3 Troubleshooting Power On-screen control Sound Tuner Others Getting Started Digital signal processor section (STR-DE1015G ONLY) Sensitivity Impedance Specifications Audio power specifications Amplifier section S/N PHONO 2.5 mV 50 75 dB1) kilohms AM tuner section FM tuner section General Video section Getting Started Glossary Center mode Dolby Pro Logic Surround Dolby Surround Effect level Page Page Index A, B C D E