Vision Fitness Comprehensive R2200 Manual for Assembly and Maintenance

S T E P 3 PINK BAG

Console Mast	Console
Handlebar

Console Mast

Console Mast

Cover

R2200

S T E P 3

•Slide the console mast cover onto the console mast.

•Use the wire tie coming from the bot- tom of the console mast to wrap around the wire harness and heart rate wires that are sitting in the frame bracket.

•Pull the wire tie up through the con- sole mast so the wire harness and heart rate wires exit the top of the mast.

•Slide the bottom of the console mast into the frame bracket. Use the 5mm allen wrench to secure the four screws (M8x15) and four lock washers (M8) to the sides of the console mast brack- et. Use the 5mm L-shaped wrench to secure the last screw (M8x15) to the edge of the bracket facing the seat. Tighten only until snug.

•Mount the console mast handlebar to the console mast with two screws (M8X20) and two lock washers (M8). Tighten with the 5mm allen wrench.

•With a screwdriver remove the four mounting screws from the backside of the console. Connect the heart rate wires and the wire harness to the pin connectors on the backside of the con- sole. Mount the console to the console mast using the four mounting screws and the screwdriver.

•Slide the console mast cover into place so it integrates with the side covers.

•Mount the water bottle cage to the console mast with the screws located on the console mast.

7