Manuals / Brands / Home Audio / Stereo Receiver / Sony / Home Audio / Stereo Receiver

Sony STR-D760Z, STR-DE1015G, STR-DE815G, STR-D760Z, STR-DE815G Tuning and Presetting Radio Stations

1 68

Download 68 pages, 1.11 Mb

29

Getting StartedPlayback/Recording

Tuning and Presetting RadioStations

The receiver lets you directly enter a station's

frequency using the number buttons (Direct Tuning).

You can also tune a station by scanning stations

(Automatic Tuning), and by selecting preset stations

(Preset Tuning: see page 30).

1Click FUNCTION in the main menu, then click

TUNER.

2Click FM/AM to select FM or AM, then click SUB.

3Click DIRECT.

4Click the number buttons to enter the frequency.

Example 1: FM 102.50 MHz

Example 2: AM 1350kHz

5Repeat steps 2 to 4 to receive other stations.

If an FM stereo program is noisy

“STEREO” flashes next to the frequency. Click FM

MODE to change to monaural (MONO) reception.

There will be no stereo effect, but the reception will

improve. To return to the auto stereo mode, click this

icon again.

If “STEREO” remains off

Click FM MODE, even when an FM stereo broadcast is

received.

If an AM program is noisy

Adjust the direction of the AM loop antenna for

optimum reception.

If you cannot tune in a station and the entered

numbers are flashing

Make sure you have entered the right frequency. If not,

reenter the frequency you want.

If the entered numbers still flash, the frequency is not

used in your area.

If you enter a frequency not covered by the tuning

interval

The entered value is automatically rounded up or down

to the closest covered value.

Tuning intervals for Direct Tuning are:

FM: 50 kHz intervals

AM:10 kHz intervals

(except for Australian and Singaporean models)

(to change to 9 kHz intervals, see page 64)

9 kHz intervals

To watch FM simulcast TV programs

Make sure that you tune in the simulcast program on

both the TV (or VCR) and the receiver.

Tuning radio stations by scanning stations

(Automatic Tuning)

1Click FUNCTION in the main menu, then click

TUNER.

2Click FM/AM to select FM or AM.

3Click + or –.

The frequency indication changes and scanning

stops when the receiver tunes in a station. To

continue scanning, click + or – again. Click + for a

higher station number; click – for a lower one.

When the scanning is finished, the receiver starts

scanning again.

USERSUBLIST

+–

FM/AM

FM 102.50

M

H

z STEREO

USERSUBLIST +–

FM/AM

FM 102.50

M

H

z STEREO

5 4 3 2 1

6 7 8 9

A B C DIRECT

REC EDIT 0

FM MODE

EXIT

FUNCTION SOUND SETUP

10250

135

USERSUBLIST

+–

FM/AM

FM 102.50

M

H

z

STEREO

USERSUBLIST +–

FM/AM

FM 102.50

M

H

z STEREO

(continued)

Contents

Main WARNING INFORMATION CAUTION Note to CATV system installer Owners record z Table of contents Getting Started On-Screen Operations Front Panel Operations Welcome! Understanding How the Receiver Works About the color system for video input Hookup Overview Before you get started Antenna Hookups Connecting an outdoor antenna Infrared (IR) Repeater Hookups Audio Component Hookups z Speaker System Hookups Speaker placement for STR-DE1015G Speaker placement for STR-DE815G and STR-D760Z z Selecting the speaker system Selecting the impedance (except for Singaporian models) TV-VCR Hookups c LD/DVD (to LD or DVD player) Note for STR-DE815G and STR-D760Z d TV/DBS* (to TV tuner or Digital Broadcasting Satellites (DBS) receiver) e VIDEO 3 INPUT (to a video camera or a video game) z (for USA and Canada only) Playing decoded Dolby Digital (AC-3) soundtracks (STR-DE815G and STR-D760Z) Digital Component Hookups (STR-DE1015G only) AC Hookups Setting the voltage selector (only on the models supplied with the voltage selector) Connecting the AC power cord Before using for the first time 1 2 b Inserting batteries into the remote (USA and Canada) Inserting batteries into the remote (other countries) 1 2 Notes on the remote How to use the remote 30 1 2 3 Registering a TV (or Monitor) IR code registration is unnecessary in the following case 3 Registering IR codes 1 2 7 8 Erasing TV IR codes Registering IR codes 1 2 3 Registering Audio and Video Components IR code registration is unnecessary in the following case 5 6 7 To return to the main menu To return to a previous menu Erasing IR codes To erase all the IR codes for the current component (e.g., OTHER CD) To erase all the IR codes Dolby Digital (AC-3) (STR-DE1015G only) Specifying the speaker type 1 2 3 type of speakers you connected. Front speaker (FRONT) Adjusting the speaker volume Use the remote while seated in your listening position to adjust the volume of each speaker. 1 2 3 You will hear the test tone from each speaker in sequence. Dolby Pro Logic (STR-DE815G and STR-D760Z) Specifying the center mode Adjusting the speaker volume 1 2 Dolby Pro Logic Surround SetupDolby Surround Setup 3 4 5 6 Selecting a Component 1 2 3 4 To turn off the selected component To turn off all components To mute the sound To listen to digital program sources (STR-DE1015G) To listen to decoded Dolby Digital (AC-3) program sources (STR-DE815/D760Z) Watching TV or Video Programs 1 2 Getting StartedPlayback/Recording Tuning and Presetting Radio Stations + + 2 3 4 Tuning preset stations (Preset Tuning) 3 + Presetting the radio stations + Recording p Recording to audio tape or MD 1 2 3 4 5 6 p Recording other components to video tape 1 2 3 4 5 6 Using the Pre-programmed Sound Fields Page Sound fields for STR-DE815G and STR-D760Z Genre Mode Surround effect Selecting the sound fields main menu. See Sound fields. . . charts on pages 33 and 35. p STR-DE1015G p STR-DE815G and STR-D760Z To turn off the sound fields Customizing the Sound Fields EQ C LEV* R (BAL/LEV)*/W LEV* LFE MIX/D.COMP WALL/SEAT (F-R/L-R)/REV EFFECT MODE GENRE Adjusting the equalizer parameter (STR-DE1015G) MODE REAR CENTER DELAY Adjusting the tone parameter (STR-DE815G and STR-D760Z) 3 4 2 ++ Adjusting the delay time (STR-DE1015G) 4 THEATER EXIT 5 SHORT, LONG, etc.,) to adjust the parameter. 4 To reset the delay time to the factory settings Click STANDARD. Adjusting surround sound parameters (except for delay time) main menu to display the SOUND FIELD SELECT menu. Page Registering Desired Components (User IR setting) 2 3 4 5 Indexing 2 3 Starting a Component Automatically at Power On (Auto Start) 2 Playing Components Automatically (Auto Play) 2 Starting Several Components in Sequence Automatically (Macro Play) Setting the sequence of IR codes 2 3 4 Changing the Display Settings Selecting the display parameters 2 Adjusting the Sensitivity of the Remote 2 Adjusting the position of the on-screen display 2 3 Using the Sleep Timer 2 Operating a CD Changer Downloading the CD name data in a Sony CD changer with a CTRL A1 jack 2 Indexing a CD (continued) Space bar 1 INDEX. Searching for a CD quickly 3 Front Panel Descriptions 1 @ @ !@@ !@ !!!!!@@ !!0532 6 894 7 Remote Descriptions Selecting a Component 1 2 Playing audio and video components at the same time 1 2 Tuning Radio Stations 1 2 3 Tuning preset stations (Preset Tuning) 1 2 3 Recording 1 2 3 Digital Recording (STR-DE1015G only) Surround (SUR) parameters (STR-DE1015G) 5 To adjust the tone parameters (STR-DE815G / D760Z) 2 5 Customizing the Receiver Operations 1 2 5 6 Set up parameters (STR-DE1015G) Indexing 1 2 3 4 Playing Audio Components Without the TV (Flasher) (except for USA and Canada) 1 2 3 Troubleshooting Power On-screen control Sound Tuner Others Getting Started Digital signal processor section (STR-DE1015G ONLY) Sensitivity Impedance Specifications Audio power specifications Amplifier section S/N PHONO 2.5 mV 50 75 dB1) kilohms AM tuner section FM tuner section General Video section Getting Started Glossary Center mode Dolby Pro Logic Surround Dolby Surround Effect level Page Page Index A, B C D E