Scag Power Equipment STT61V-35BVAC Maintenance Chart - Recommended Service Intervals, Section

Section 7 R

MAINTENANCE

7.1 Maintenance Chart - Recommended Service Intervals

		HOURS
							Procedure	Comments
Break-In	8	20	40	100	200	500
(First 10)
X							Check all hardware for tightness
X							Check hydraulic oil level	See paragraph 7.3
X							C h e ck a l l b e l t s fo r p r o p e r	See paragraph 7.8
							alignment
X							Check coolant level	See paragraph 7.11
							Check hydraulic fittings and hoses	Use extreme caution when
	X						for leaks	checking the hydraulic hoses.
								See paragraph 2.6
	X						Check engine oil level	See paragraph 7.4
	X						*Clean mower	See paragraph 7.12
	X						Check condition of blades	See paragraph 7.9
	X						Apply grease to fittings	See paragraph 7.2
	X						Check tire pressure	See paragraph 7.10
	X						Inspect seat belt for wear or	See paragraph 2.5
							damage
	X						Check the operator interlock	See paragraph 4.2
							system
	X						Check coolant level	See paragraph 7.11
		X					Change engine oil and filter	See paragraph 7.4
			X				Check battery electrolyte level	See paragraph 7.7
							clean battery posts and cables
			X				Check belts for proper alignment	See paragraph 7.8
				X			Apply grease to fittings	See paragraph 7.2
				X			Change engine oil	See paragraph 7.4
				X			*Clean air cleaner element	See paragraph 7.6
				X			Check lubricant in cutter deck	See paragraph 7.11
							gearbox
				X			Check condition of fuel lines

* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions

31