Scag Power Equipment STT-29DFI, STT61V-29DFI Section, 9. 7-Position Custom-Cut Baffle Adjustment

Section 6

C.4-3/4" or 5-1/4" Position - (See Figure 6-9). Placing the baffle in either the 4-3/4" or 5-1/4" setting will enhance fall cutting (leaf pickup) and reduce cutter deck "blowout".

To adjust the Custom-Cut Baffle height:

1.Place the cutter deck in the transport position.

2.Remove the hardware securing the Custom-Cut Baffle to the cutter deck.

-NOTE -

R

Hardware location used in the illustrations are for reference only. Location of hardware may vary depending on cutter deck size.

3.Move the Custom-Cut Baffle to desired position. See Figure 6-9.

4.Reinstall the mounting hardware. Torque hardware to 39 lb-ft.

1 2 3 4

A

B

1 2 3 4

A

B

Custom-Cut Baffle Adjustment
Mounting Slot Selected		Mounting Hardware Location
Slot “A”	Hole 1	Hole 2	Hole 3	Hole 4
Height (inches)	3-3/4”	4-1/4”	4-3/4”	5-1/4”
Slot “B”		Hole 2	Hole 3	Hole 4
Height (inches)		3-1/2”	4”	4-1/2”

Figure 6-9. 7-Position Custom-Cut Baffle Adjustment

29