JVC SP-THS1S Sleep Timer Sleep, Adjusting the treble sound Treble, Changing the video signal

Basic operations

See page 13 for button locations.

Sleep Timer [SLEEP]

The system turns off automatically when the specified period of time has passed.

Press SLEEP.

Each time you press the button, the shut-off time changes. Example:

minutes

S L E E P 6 0 m i n

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly.

To cancel

Press SLEEP repeatedly until “SLEEP OFF” appears.

• Turning off the power also cancels the Sleep Timer.

Adjusting the output level of the subwoofer and center/surround speakers [S.WFR, CENTER, L-SURR.-R]

Press S.WFR +/– to adjust the subwoofer.

Press CENTER +/– to adjust the center speaker.

Press SURR.-L +/– to adjust the surround left speaker.

Press SURR.-R +/– to adjust the surround right speaker.

NOTE

•You can also make adjustments by using the setup menu shown on the TV screen. (See page 32.)

•The adjustments take effect for all sources.

•You cannot make this adjustment when FM or AM is selected as the source.

Adjusting the treble sound [TREBLE]

Press TREBLE +/–.

NOTE

• The adjustments take effect for all sources.

Changing the video signal

The system can be accommodated to your TV’s video signal.

7While DVD is selected as the source and before playback

1 Press and hold SCAN MODE for

2 seconds.

The current setting appears on the display window.

2 Press Cursor 3/2 to select the desired mode.

•	RGB:	Select when your TV accommodates the
		interlaced RGB/composite video signal.
•	Y/C:	Select when your TV accommodates the
		interlaced S-video signal.

You can get better picture quality in the order — “RGB” > “Y/C” > Composite.

3 Press ENTER while the selected mode is shown on the display window.

NOTE

•Although the picture may be distorted when you press ENTER, this is not a malfunction of the system.

•“RGB” is selected at your purchase.

15