JVC SP-THS1F, XV-THS1 Operating the VCR, Operating external components with the remote control

Keep the button pressed until step 4 is finished.

3 Press ENTER.

4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a Panasonic VCR:

Operating external components with the remote control

See page 11 for button locations.

Operating the VCR

7To set the manufacturer’s code

1 Slide the remote control mode selector to VCR.

7Operation

Aim the remote control at the VCR.

IMPORTANT

Before using the remote control to operate a VCR; Set the remote control mode selector to VCR.

The following buttons are available:

2

VCR:Turns VCR on and off.

VCR

Press and hold VCR.

Press 2, then 1.
For an Philips VCR:
Press 0, then 5.
Manufac-	Code	Manufac-	Code
turer		turer
JVC	01	Nokia	16
Aiwa	02, 20	Nordmende	17	– 19, 31
Bell+Howell	03, 16	Orion	20
Blaupunkt	04	Panasonic	21
CGM	03, 05, 16	Philips	05, 22
Daewoo	34	Phonola	05
Digtal	05	Saba	17	– 19, 23, 31
Fisher	03, 16	Samsung	24, 25
G.E.	06	Sanyo	03, 16
Grundig	07	Sharp	26, 27
Hitachi	08, 09	Siemens	07
Loewe	05, 10, 11	Sony	28	– 30, 35
Magnavox	04, 05	Telefunken	17	– 19, 31, 32
Mitsubishi	12 – 15	Toshiba	33

5 Release VCR.

If there is more than one code listed for your brand, try each one until you enter the correct one.

3(play button):Starts playback. 7:Stops operation.

8:Pauses playback.

¡:Fast forwards video tape.

1:Rewinds video tape.

REC:Press this button together with 3 (play button) to start recording or together with 8 to pause recording. CHANNEL +/–:Changes the TV channels on the VCR.

12