Connections

Do not connect the power cord until all other connections have been made.

Connecting the satellite (front, center, surround) speakers and the subwoofer

Front speakers

Center speaker

Speaker cord

• Connect the black cords to the black (-) terminals.

• Connect the white cords to the red (+) terminals.

Before connecting the speaker cords;

Twist and pull the insulation coat off and remove.

Subwoofer

Surround speakers

CAUTION

When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated on the rear of the center unit.

DO NOT connect more than one speaker to one speaker terminal.

When installing the satellite speakers on the wall;

Be sure to have them installed on the wall by a qualified personnel. DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from their falling off the wall due to incorrect installation or weakness in wall structure.

Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to equipment may result if the speakers installed interfere with daily activities.

8

Page 11
Image 11
JVC SP-THS1F, XV-THS1, SP-WS1, SP-THS1S manual Twist and pull the insulation coat off and remove, Subwoofer Surround speakers