Smeg DI607 Troubleshooting, User instructions, E3 E4 E5 E6 E7 E9, Fault, Description, Light off

User instructions

E3

E4

E5

E6

E7

E9

6. Troubleshooting

The dishwasher is capable of signalling a number of faults through the simultaneous illumination of several indicator lights, with the following meanings:

FAULT	DESCRIPTION
	Water heating malfunction
	The water is not heated or the heating parameters
	are not correct. Repeat the washing program; if the
	problem persists, contact the after-sales service.
	Water temperature monitoring malfunction
	Interrupt the program and switch off the dishwasher.
	Switch the dishwasher back on, program it again and
	start the washing cycle. If the problem persists,
	contact the after-sales service.
	Water intake malfunction
	The appliance does not take in water or does not do
	so correctly. Check that the water connections are
	correct, the water intake tap is turned on and the filter
	is not fouled. If the problem persists, contact the
	after-sales service.
	Water pump-out malfunction
	The appliance does not pump out the water or does
	not do so correctly. Check that the drain hose is not
	kinked or crushed and that the siphon and filter are
	not fouled. If the problem persists, contact the after-
	sales service.
	Turbine flow-regulator malfunction
	(for the relevant models only)
	The appliance is not able to "measure" the amount of
	water loaded accurately. Interrupt the program and
	switch off the dishwasher. Switch the dishwasher
	back on, program it again and start the washing
	cycle. If the problem persists, contact the after-sales
	service.
	Water intake system malfunction
	Contact the after-sales service.

Light off Light on Light flashing

68

     GI