User instructions
If the dishes do not come out clean, check that:
ξthe correct amount of detergent has been added;
ξthere is regenerating salt inside the special container;
ξthe dishes are being loaded correctly;
ξthe selected program is suitable for the dish types and their degree of soiling;
ξall the filters are clean and positioned correctly;
ξthe spray arm nozzles are not obstructed;
ξthere is no object obstructing the rotation of the spray arms;
ξthe detergent dispenser hatch has not been prevented from opening properly by an incorrectly positioned item.
If the dishes fail to dry or remain dull, check that:
ξthere is rinse aid inside the special container;
ξthe rinse aid dispenser setting is correct;
ξthe detergent used is of good quality and has not lost its effectiveness (for example, through incorrect storage, with the box left open).
If the dishes show signs of streaking, staining, etc., check that:
ξthe rinse aid dispenser setting is not too high.
If there are visible traces of rust inside the tank:
ξthe tank is made of steel, and therefore any rust marks are due to external elements (fragments of rust from the water pipes, pots, cutlery, etc.). Special products are commercially available to remove such marks;
ξcheck that the amount of detergent being used is correct. Certain detergents can be more corrosive than others.
ξcheck that the cap of the salt container is securely closed, and that the water softening setting is correct.
If after following the above troubleshooting instructions the problem persists, call the nearest
WARNING: any operations performed on the appliance by unauthorised persons are not covered by the warranty and shall be paid for by the user.
67
| GI |
|
