User instructions
If an alarm occurs the appliance interrupts the program in progress and signals a fault.
ξAlarms E3, E4 and E9 interrupt the current program immediately.
ξThe E5, E6 alarms interrupts the running program once the cause is resolved, it will bring bach the execution of the program.
ξThe alarm E7 is visualized at the end of the cycle that comes, however, brought to the end since the operation of the dishwasher is not harmed.
To “reset” an alarm is necessary:
ξOpen and close the door, or turn off and on the machine. At this point is possible to program the dishwasher again.
If the malfunction persists, contact your authorised Service Centre.
TECHNICAL DATA
Width
Depth measured flush with the outer edge of the control panel
Height
Capacity
Water supply pressure
Electrical characteristics
559mm
550mm
578 mm
7 Standard place settings
min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)
See rating plate
69
| GI |
|
