Cisco Systems OL-7029-01 manual Owner virtual server submode, No owner maxconns, Maxconns, 169

Chapter 2 Content Switching Module with SSL Commands

owner (virtual server submode)

owner (virtual server submode)

To define an owner that may access the virtual server, use the owner command in the SLB virtual server submode. To remove the owner, use the no form of this command.

owner owner-name maxconns number

	no owner maxconns
Syntax Description	owner-name	Name of the owner object.
	maxconns	Sets the maximum number of connections for this owner.
	number	Maximum number of connections.
Defaults	This command has no default settings.
Command Modes	SLB virtual server configuration submode
Command History	Release	Modification
	CSM release 3.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
Examples	This example shows how to specify an owner for virtual server access:
	Cat6k-2(config-slb-vserver)# owner madrigal maxconns 1000
	advertise (virtual server submode)
Related Commands

	Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01		2-169