Attaching the camera unit to the earhook to wear
1 Insert the camera unit until it clicks into place.
UP L
≥Insert so that the projecting part A of the camera will face up.
2 Loosen the camera/main unit connection cable B to the shape of an ear, and fit it in the holder C.
UP L
3 Hook the earpieces D to ears so that the camera unit will be positioned on the left, and adjust the size.
≥Adjust by slowly pulling the adjuster E sideways.
≥If you adjust in such a way that the camera unit comes into close contact with the cheek, you can record less blurry images.
4 Hold the camera attachment portion F , and adjust the direction of the lens.
UNLOCK
LOCK
≥If the direction of the lens cannot be changed, loosen the adjustment knob G slightly and tighten it after adjusting the direction of the lens.
≥If the camera unit is shaky, tighten the adjustment knob G.
∫How to remove the
camera
Hold the camera attachment portion as shown in the figure, and remove the camera unit in the direction of the arrow.
∫How to attach the adjuster (Large)
(supplied)
When the earhook is too tight, | | |
remove the adjuster of the earhook, | ||
| ||
and replace it with the supplied |
| |
adjuster (Large). | PUSH | |
of the arrow using the | ||
1 Press H in the direction |
| |
supplied adjuster (Large) |
| |
to pull out the attached adjuster. |
|
2Insert the both side of supplied adjuster (Large) until it clicks into place.
≥Do not touch the lens or pull the cable while attaching or removing.
≥When you adjust the adjuster, do so slowly without applying too much force.
≥If the adjustment knob comes off, attach it as indicated in
the right figure.
- 10 -
