∫If the connection between this unit and the smartphone has been
interrupted
The connection between this unit and the smartphone may be interrupted temporarily depending on radio wave conditions.
An attempt to reconnect is made automatically when radio wave interference, etc. is eliminated. Please note the following.
≥If you have been recording a motion picture or recording in the [Interval rec mode], the recording will continue even after the connection interruption. To stop the recording, operate this unit.
≥If Image App has been used in playback mode, if reconnecting takes 30 seconds or more, this unit turns to recording mode and Image App will run in recording mode after the connection is restored.
≥If this unit has been deleting files, cutting unwanted scenes or formatting, the operation will continue even after the connection interruption.
Do not remove the microSD card while the Access lamp of this unit lights.
Setting date and time
The clock of this unit is synchronized with that of the smartphone.
Synchronize to adjust the clock, etc.
When you start Image App connecting with this unit for the first time, a message asking you to set the date and time will appear. (This message will also be displayed if this unit remains unused for a long period of time.)
Perform Steps 2 below to set the date and time.
Preparation: | Connect this unit with the smartphone and start Image App. (l 17) |
1
2
Tap 
# [Camera setup].
Tap [Date & time].
≥When you want to adjust the clock, change the time of the smartphone first, and then synchronize the time with this unit.
≥It may take approximately 60 seconds to synchronize the time of the smartphone with that of this unit.
≥When the
≥The setting range from 1 January 2013 through 31 December 2039 is available for time synchronization with the smartphone.
- 20 -
