∫When inner side of the lens is fogged (condensation)
Condensation may occur and the inner side of the lens may be fogged when this unit is moved to a warm area from a cold area, such as at high altitude.
It is not a malfunction or failure of this unit. It may be caused by the environment in which this unit is used.
≥Be careful of condensation since it causes lens stains, fungus and unit malfunction.
What to do when inner side of the lens is fogged
≥Turn off this unit and open the side cover in a place with constant ambient temperature, away from high temperatures, humidity, sand and dust. The fog will disappear naturally in about 2 hours with the side cover open when the temperature of this unit gets close to the ambient temperature.
≥Contact Panasonic’s Service Centre if the fogging does not disappear.
Check before using underwater
Do not open or close the side cover in places with sand and dust, close to water, or with wet hands. Sand or dust adhering may cause water leaks.
1Open the side cover.
1Slide the LOCK switch A to the left to unlock the side cover.
B: Unlocked when the red indicator is visible
2Slide the side cover downward to open it.
B
A
2Check that there are no foreign objects on the inner side of the side cover.
≥ If there are any foreign objects, such as lint, hair, sand, etc., on the surrounding area, water will leak within a few seconds causing malfunction.
3If there is foreign matter adhering to the unit, remove it.
≥Be extremely careful to remove any sand etc. that may adhere to the sides and corners of the rubber seal.
≥Wipe it off with a dry soft cloth if there is any liquid. It may cause water leaks and malfunction if you use this unit with liquid adhered.
4Check for cracks and deformation of the rubber seal on the side cover.
≥The integrity of the rubber seals may decrease after about 1 year, with use and age. To avoid permanently damaging this unit the seals should be replaced once every two years. Please contact Panasonic’s Service Centre for related costs and other information.
5Close the side cover securely.
1Close the side cover and slide it upward.
2Slide the LOCK switch to the right to lock the side cover.
≥Lock securely to the points where the red portion of the LOCK switch is no longer visible.
≥Securely close it until it clicks.
≥To prevent water seeping into this unit, be careful not to trap foreign objects such as liquids, sand, hair or dust etc.
- 4 -
