Connecting to devices on the network (Connecting in Access Point mode)

The following connections are for controlling this unit from a smartphone via an access point (wireless router, etc.) or for playing back motion pictures in this unit on a DLNA-compatible TV. (The connections of both 1 and 2 are required)

Check if the wireless access point is compatible with IEEE802.11b, IEEE802.11g, or IEEE802.11n.

Recording, playback and uploading using Image App, etc. are also available for the connection via an access point.

DLNA-compatible devices

Image App

 

1Connecting this unit to an access point (such as a wireless LAN router)

Connecting to a WPS-compatible access point

Please read the manual of your access point and check if the access point is compatible with WPS.

If your access point is not compatible with WPS, connect this unit with an access point according to “Entering SSID to connect to an access point”. (l 42)

1 Press the Wi-Fi/WPS button continuously to change the Wi-Fi mode lamp to [ ].

The Wi-Fi mode lamp [ ] flashes.

2 Press and hold the Wi-Fi/WPS button for 3 seconds or more.

The Wi-Fi mode lamp [ ] flashes faster.

3 Press the WPS button of your access point within 3 minutes. (Set to the WPS standby state.)

Wi-Fi mode lamp [ ] will turn on when the connection is completed.

- 41 -

Page 41
Image 41
Panasonic HX-A100 owner manual Image App