>> Distribute sound and picture with BeoLink
System modulator | Link frequency |
If you have an audio setup, such as a BeoLink Active/Passive, and you choose to set up a
To switch on the system modulator …
>Bring up the TV SETUP menu and highlight
OPTIONS.
>Press the centre button to bring up the OPTIONS menu and highlight
CONNECTIONS.
>Press the centre button to bring up the CONNECTIONS menu, and highlight LINK TUNING.
>Press the centre button to bring up the LINK TUNING menu and highlight
MODULATOR.
>Use the navigation button left or right to reveal ON.
>Press the centre button to store the setting, or …
>… press and hold BACK to leave all menus without storing.
If, for example, a TV channel in your area is broadcasted on the same frequency as the factory setting for the BeoLink system; 599 MHz, you must tune the system modulator to an unoccupied frequency. When you change the link frequency in the main room television, make sure that the link frequency in the link room television corresponds to it.
To change the link frequency …
>Bring up the TV SETUP menu and highlight
OPTIONS.
>Press the centre button to bring up the OPTIONS menu and highlight
CONNECTIONS.
>Press the centre button to bring up the CONNECTIONS menu, and highlight LINK TUNING.
>Press the centre button to bring up the LINK TUNING menu and highlight
FREQUENCY.
>Use the navigation button left or right to find an unused frequency.
>Press the centre button to store the setting, or …
>… press and hold BACK to leave all menus without storing.
LINK TUNING |
|
FREQUENCY | 599 |
TV SYSTEM | B/G |
MODULATOR | AUTO |
|
|
The LINK TUNING menu. |
|
|
|
LINK TUNING |
|
FREQUENCY | 599 |
FINE TUNE | 0 |
TV SYSTEM | B/G |
|
|
The LINK FREQUENCY menu.
When tuning in the link frequency in the link room, a test image is shown. FINE TUNE is only available in link room/Option 4 setups.
40
