![](/images/new-backgrounds/1312997/31299721x1.webp)
Register additional video equipment
If you connect additional video equipment to your television, you must register the equipment in the CONNECTIONS menu.
When the television is first set up, some of the equipment connected at that particular moment is detected by the television. The CONNECTIONS menu appears automatically on the screen during
What is connected?
Registering the equipment connected to the television enables you to operate it with your remote control.
>Bring up the TV SETUP menu and highlight OPTIONS.
>Press the centre button to bring up the OPTIONS menu. CONNECTIONS is highlighted already.
>Press the centre button to bring up the CONNECTIONS menu.
>Use the navigation button up or down to step between the different socket groups: AV1, AV2, AV3, AV4, AV5, AV6 and HDMI EXPANDER, HDMI MATRIX when available. For information about LINK TUNING see page 39.
>Press the centre button to be able to register a connected product type to the highlighted socket group.
>Use the navigation button up and down to move between the sockets in the group.
>Use the navigation button left or right to register what you have connected to the highlighted socket.
>Press the centre button to be able to select the product from an
>Use the navigation button left or right to see lists for other types of products.
>Use the navigation button up or down or a number button to highlight the name of the product and press the centre button to register it.
>Press the green button to be able to name the source. The naming menu is now activated.
>Use the navigation button up and down to find the individual characters in the name.
>Press the centre button to accept the name.
CONNECTIONS |
|
AV1 | NONE |
AV2 | NONE |
AV3 | NONE |
AV4 | NONE |
AV5 | CAMERA |
AV6 | NONE |
HDMI EXPANDER | NO |
HDMI MATRIX | NO |
LINK TUNING | NO |
|
|
The available sockets may vary according to your setup.
>Names are shown in the television on- screen display when the source is selected.
>Press the centre button to bring up the STANDBY OPTIONS menu.
>Use the navigation button up or down to see the list of standby options for when the connected equipment should switch to standby.
>Press the centre button to select a standby option.
>When you have completed your settings for a single socket group, press the centre button to return to the CONNECTIONS menu.
>Repeat the procedure for each socket group.
At
11