First-time setup
The setup procedure is activated when the television is connected
The sequence of menus in first-time setup
to the mains and switched on for the first time. You are led through an automatic series of
If you change your setup at a later date, you can access the same menus and update your settings. Remember that you need to set the speaker types and the distances in the SOUND menu.
MENU LANGUAGE … You can select the language for
TUNER SETUP … Disable the television tuner or DVB tuner, if you like, see page 7.
CONNECTIONS … Select the type of equipment you have connected to each socket groups, the sockets used, the product name, and the source name. For further information about the CONNECTIONS menu, see page 8.
CHECK AERIAL CONNECTION … This prompt only appears, if the television tuner is enabled.
AUTO TUNING … When you have registered your connected equipment, a menu for channel tuning automatically appears on the screen. Use the navigation button right to start auto tuning. The television finds all available channels. For further information about tuning TV channels, see page 15.
SPEAKER TYPE … In this menu, you select which speakers are connected to the television, if any. See page 19 for further information.
SPEAKER DISTANCE … In this menu, you select the distance in metres to each of the speakers in your setup.
SPEAKER LEVEL … In this menu, you can adjust the volume level of each speaker in your setup.
ADJUSTMENT … In this menu, you can adjust bass, volume, treble, etc.
DVB SETUP … If the DVB HD tuner is enabled, the DVB SETUP menu appears, see the separate DVB HD Guide for further information.
For information about where to connect extra equipment, see the chapter about connection panels in Getting Started.
5
