Bang & Olufsen Aug-40 manual AV2 Source None Name IR Socket IR Type Hdmi, DIF None

>> Register additional video equipment

What’s on the AV1 – AV6 menu …

SOURCE … Select the source you have connected. The option you select indicates which remote control button switches on the source. For example, a source registered as V. MEM is switched on when you press the V MEM button. A source registered as DTV2 is switched on by pressing LIST and then the navigation button up or down to display DTV2 and press the centre button. (Beo5: Press DTV2). Options are:

NONE … if nothing is connected. V.MEM … for a connected video recorder or hard disk recorder.

DVD/DVD2 … for a connected DVD player or recorder.

DTV2… for other equipment, such as a set-top box.

DTV … occupied by the DVB module, unless you disable the DVB module. V.AUX2 … for other equipment, such as a video game console.

TV … occupied by the TV tuner, unless you disable both tuners in the TUNER SETUP menu.

PC … for a connected PC.

DECODER … for a connected decoder. The source lists are divided into 4 groups; ‘stb’ are set-top boxes, ‘dvd’ are DVD players and recorders, ‘vmem’ are video recorders including hard disk recorders, ‘other’ are, for example, PCs and media centres.

NAME … Allows you to name the source you are registering, the name you enter appears in the on-screen display when you activate the source.

(AUTO SELECTION) … Allows a source connected to AV5 to be selected automatically as soon as the television detects a signal, provided the television is on at the time. Options are ON and OFF.

IR SOCKET … Select which IR socket is used for the source, options are PUC1, PUC2, PUC3, PUC4 and NONE.

IR TYPE … Select the type of IR connection used. Options are PLUG (for a cable connection) and IR (for an IR blaster connection).

HDMI … Indicates whether or not the equipment is connected to the television via one of the HDMI sockets. Select the appropriate socket: A, B, or C.

(YPbPr) … Indicates whether or not the equipment is connected to the television via the YPbPr sockets. Options are YES and NO. Can only be registered in one of the AV menus (AV2-AV4 or AV6) at any time.

(VGA) … Indicates whether or not the equipment is connected to the television via the VGA socket. Options are YES and NO.

S/P-DIF … Select the S/P-DIF connection used. Options are 1, 2 and NONE.

An HDMI Expander must always be connected to HDMI C, when present, otherwise to HDMI B. When connecting an HDMI Expander, additional HDMI sockets become available; C1, C2, C3 and C4.

While it is possible to register equipment under any of the available source types, the type you select affects how you can use your source.

AV2
SOURCE	NONE
NAME	. . . . .
IR SOCKET	NONE
IR TYPE	IR
HDMI	NONE
Y/Pb/Pr	NO
S/P-DIF	NONE

Regarding High Definition (HD) sources …

Standard Definition (SD) signals can be recorded, as well as distributed to a link room television, but HD signals cannot.

Connect both the HD and the SD signals to the television. The best signal is always used. If no HD signal is available, the SD signal is shown.

12