Entering SSID to connect to an access point
Enter SSID (Wireless network name) and password of your access point to connect this unit to the access point.
Preparation: Connect this unit with the smartphone. (l 17)
1 Check the SSID and password of your access point.
≥The SSID and password of the access point (e.g. a wireless router) you use are described on the access point device or in its manual. For details, refer to the access point manual.
2 Tap 
# [Camera
3 Press the 
].
≥ The 
] flashes. (“1 Beep” sounds 8 times.) ≥ When “2 Beeps” sound 8 times, the connection is completed.
∫About the connection destination in Live broadcast mode
You can register up to three SSIDs for live broadcasting (step 2)
When perfoming a live broadcast, a connection attempt will be made with the first SSID, and if it fails, an attempt will be made with the second one, and so on.
≥From [Live mode settings] # [Set connect. dest.], the following can be set. j Changing the priority order of the SSIDs for live broadcasting
j Deleting connection destinations
≥To disconnect from the access point, press the
- 36 -
