Cisco Systems OL-7029-01 manual Commands Specific to the Content Switching Module with SSL

C H A P T E R 3

Commands Specific to the Content Switching Module with SSL

This chapter contains an alphabetical listing of SSL specific commands for the Catalyst 6500 series switch Content Switching Module with SSL.

These commands are not supported on the Catalyst 6500 series switch Content Switching Module. For additional SSL services information, refer to the following documentation:

•Release Notes for the Catalyst 6500 Series Switch Content Switching Module with SSL

•Catalyst 6500 Series Content Switching Module with SSL Installation and Configuration Note

Table 3-1provides a brief description of the commands contained in this appendix.

	Table 3-1	Command Descriptions
	Command		Description
	clear ssl-proxy conn		Clears the SSL connections.
	clear ssl-proxy session		Resets the entries from the session cache.
	clear ssl-proxy stats		Resets the statistics counters maintained in different SSL
			Services Module system components.
	crypto ca export pem		Exports privacy-enhanced mail (PEM) files from the SSL
			Services Module.
	crypto ca import pem		Imports a PEM file to the SSL Services Module.
	crypto ca export pkcs12		Exports a PKCS12 file from the SSL Services Module.
	crypto ca import pkcs12		Imports a PKCS12 file to the SSL Services Module.
	crypto key export rsa pem		Exports a PEM-formatted RSA key from the SSL Services
			Module.
	crypto key import rsa pem		Imports a PEM-formatted RSA key to the SSL Services
			Module.
	debug ssl-proxy		Turns on the debug flags in different system components.
	show ssl-proxyadmin-info		Displays the administration VLAN and related IP and
			gateway addresses.
	show ssl-proxy buffers		Displays the TCP buffer usage information.
	show ssl-proxycertificate-history		Displays the certificate event history information.
		Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01				3-1