Cisco Systems OL-7029-01 manual Arp, Vlan id, Defaults Command Modes Command History, Examples

Chapter 2 Content Switching Module with SSL Commands

arp

arp

To configure a static ARP entry, use the arp command. To remove the static ARP entry from the configuration, use the no form of this command.

arp ip_address mac-address vlan id

	no arp ip_address
Syntax Description	ip_address	IP address that you want associate with the ARP entry.
	mac-address	MAC address of the host.
	vlan id	Identifies the VLAN.

Defaults

Command Modes

Command History

This command has no default settings.

CSM configuration submode

Release	Modification
CSM release 3.2(1)	This command was introduced.
CSM-S release 1.1(1)	This command was introduced.

Examples	This example shows how to configure a static ARP entry:
	Router(config-module-csm)#arp 1.1.1.1 0123.4567.89ab vlan 3

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

2-2 OL-7029-01