Cisco Systems OL-7029-01 Client-group policy submode, No client-group, Ip access-list standard

Chapter 2 Content Switching Module with SSL Commands

client-group (policy submode)

client-group (policy submode)

To associate an access list with a policy, use the client-groupcommand in SLB policy configuration submode. To remove an access list from a policy, use the no form of this command.

client-group{1–99 std-access-list-name}

	no client-group
Syntax Description	1–99	Standard IP access list number.
	std-access-list-name	Standard access list name.
Defaults	This command has no default settings.
Command Modes	SLB policy configuration submode
Command History	Release	Modification
	CSM release 1.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
	Only client groups that you create with the ip access-list standard command can be associated with an
Usage Guidelines
	SLB policy. You can only associate one client group with a given SLB policy.
Examples	This example shows how to configure a client group:
	Cat6k-2(config-slb-policy)# client-group 44
	Cat6k-2(config-slb-policy)# exit
	ip access-list standard
Related Commands
	policy
	show module csm owner

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-45