Cisco Systems OL-7029-01 manual Show ssl-proxy status

Chapter 3 Commands Specific to the Content Switching Module with SSL

show ssl-proxy status

show ssl-proxy status

To display information about the Content Switching Module with SSL proxy status, use the show ssl-proxy status command.

show ssl-proxy status

Syntax Description This command has no arguments or keywords.

Defaults This command has no default settings.

Command Modes

Command History

EXEC

Release	Modification
Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
12.1(13)E and	switches.
SSL Services Module
Release 1.1(1)
SSL Services Module	The output of the show ssl-proxy status command was changed to
Release 1.2(1)	include statistics that are displayed at a 1-second, 1-minute, and
	5-minute traffic rate for CPU utilization.
CSM-S release 1.1(1)	This command was introduced.

Examples	This example shows how to display the status of the Content Switching Module with SSL:
	ssl-proxy#			show ssl-proxy status
	FDU	cpu	is	alive!
	FDU	cpu	utilization:

% process util	: 0		% interrupt	util :	0
proc cycles : 0x4D52D1B7			int cycles	: 0x6B6C9937
total cycles: 0xB954D5BEB6FA
% process util (5 sec)		: 0	% interrupt util (5 sec) : 0
% process util (1 min)		: 0	% interrupt		util (1 min): 0
% process util (5 min)		: 0	% interrupt		util (5 min) : 0
TCP cpu is alive!
TCP cpu utilization:
% process util	: 0		% interrupt	util :	0
proc cycles : 0xA973D74D			int cycles	: 0xAA03E1D89A
total cycles: 0xB958C8FF0E73
% process util (5 sec)		: 0	% interrupt util (5 sec) : 0
% process util (1 min)		: 0	% interrupt		util (1 min): 0
% process util (5 min)		: 0	% interrupt		util (5 min) : 0
	Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01						3-43