Cisco Systems OL-7029-01 Set ip dscp policy submode, Set ip dscp dscp-valueno set ip dscp, Policy

Chapter 2 Content Switching Module with SSL Commands

set ip dscp (policy submode)

set ip dscp (policy submode)

To mark packets that match the policy with a DSCP value, use the set ip dscp command in the SLB policy configuration submode. To stop marking packets, use the no form of this command.

set ip dscp dscp-valueno set ip dscp

Syntax Description	dscp-value	The range is from 0 to 63.
Defaults	The default is that the CSM does not store DSCP values.
Command Modes	SLB policy configuration submode
Command History	Release	Modification
	CSM release 1.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
Examples	This example shows how to mark packets to match a policy named policy_content:
	Cat6k-2(config-module-csm)# policy policy_content
	Cat6k-2(config-slb-policy)# set ip dscp 22
	policy
Related Commands
	show module csm owner

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-51