Lexicon RV Receiver manual RV-5 Error Messages, Video Error Messages, Video Format Output Error

RV-5 Troubleshooting & Maintenance

RV-5 ERROR MESSAGES

RV-5 error messages are displayed on the OSD when certain error conditions exist. This section explains the meaning of these error messages and how to fix each problem.

VIDEO ERROR MESSAGES

The following error messages apply specifically to video issues.

VIDEO FORMAT OUTPUT ERROR

This error message will display when the RV-5 is connected to an HDMI video monitor but the VIDEO OUT parameter is set to a resolution that is not supported by the HDMI video monitor.

VIDEO OUTPUT NOTICE

Video output resolution not supported by HDMI monitor. Please select a different VIDEO OUT resolution.

PRESS > TO CONTINUE

VIDEO PROCESS ERROR

This error message will display when the incoming datastream is at a higher resolution than the resolution of the VIDEO OUT parameter. The RV- 5 ca n up-sample a lower resolution to a higher resolution. However it can

VIDEO PROCESS NOTICE

Video input resolution can not be higher than video output resolution when set to FAROUDJA. Please adjust settings.

To correct the problem, right click to return to the VIDEO OUT Setup parameter and change the VIDEO OUT parameter to AUTO or to a resolution setting that is supported by the video monitor.

not down - sample to a lower resolution setting.

PRESS > TO CONTINUE

HDCP VIDEO ERROR

This error message will display when the video monitor is not

HDCP NOTICE

To correct the problem, right click to return to the VIDEO OUT Setup parameter and change the VIDEO OUT parameter to AUTO or to a resolution setting that is higher than that of the incoming datastream.

HDCP compliant and the incoming datastream requires HDCP compliance. Typically, any HDMI source will require a HDCP compliant video monitor.

To correct the problem, change the incoming datastream to a non-HDCP source or change the video monitor to one that is HDCP compliant.

Display is not HDCP Capable

6-7