Lexicon RV Receiver manual WHAT’S in the BOX, Available Options, RF-1 Receiver

RV-5 Getting Started

WHAT’S IN THE BOX

The following items are included with the RV-5 Receiver:

•One AM Radio Antenna

•One FM Radio Antenna

•One User Guide (this document)

•One Remote Control

•Four AAA Batteries (for use with Remote Control)

•One Microphone

•One Microphone Rod

•One 115V Power Cord (US Version Only)

•Two 230V Power Cords (International Version Only)

AVAILABLE OPTIONS

The following accessories are available for purchase as options to the RV-5 Receiver:

•D-1 iPod Docking Station, Part No. 021-18138, allows an iPod to be connected and controlled by the RV-5 Receiver.

•RF-1 Receiver, Part No. 021-18005, allows the remote control to operate via RF (Radio Frequency), giving the remote a broader operating range.

D-1 iPOD DOCKING STATION

The optional D-1 iPod Docking Station allows you to enter a new world of listening enjoyment made possible by combining the increased storage capacity and playback flexibility of an iPod® (not included) with the sonic power of your Lexicon receiver. Operation is easy, you can use your Lexicon remote control or the front panel

of the RV-5 to access and control your iPod. Just one simple connection and you’re ready to go!

•Single connection to your Lexicon receiver

•Plays audio from an iPod through your Lexicon receiver

•Controls your iPod through your Lexicon receiver

•Simple track selection with on-screen navigation

•Charges the iPod

RF-1 RECEIVER

The optional RF-1 Receiver utilizes the RF feature of the Lexicon remote control, allowing you to control components that are completely out-of-sight, up to 100-feet away. Since the RF-1 Receiver picks up the RV-5’s remote control radio frequency signal, the remote control no longer needs to be pointed directly at the components to control them. Now you can close your entertainment center doors, hide your components, and still control them with ease.

The RF-1 Receiver accessory requires no setup to the Lexicon remote control in order for the feature to work - you need only place the RF-1 Receiver in the rack or cabinet, or attach an emitter to the RV-5 front panel over the IR receiver. Every time a command is sent from the remote control, it sends both a standard IR and an RF signal. The RF-1 Receiver automatically receives the remote’s radio signals and translates them into the infrared commands that control the components.

1-3