Lexicon RV Receiver manual Menu Options, Remote Control Light Button, Command Matrix

Basic Operation Lexicon

MENU OPTIONS

Selecting a menu option can open another menu within the menu structure. For example, selecting SETUP from the MAIN MENU opens the SETUP menu.

REMOTE CONTROL LIGHT BUTTON

The remote control is fully back lit, making it very useful in low-light conditions. Press the LIGHT button on the right side of the remote to back light all of the buttons and the LCD touch screen. To turn off the back light, press the LIGHT button again or wait. Ten

MAIN MENU

AUDIO CONTROLS VIDEO STATUS

SETUP

SETUP

DISPLAY SETUP SPEAKER/EQ SETUP INPUT SETUP SURROUND CONFIG DOLBY CONFIG MUTE LEVELS POWER ON SETTINGS

seconds after the last button is pressed, the back light will automatically shut off.

COMMAND MATRIX

The command matrix table, starting on the next page, lists the commands that each remote control button performs in each menu setting.

MENU ITEM SELECTION

Use the remote control arrows to navigate the menu structure.

To select a menu item in an open menu:

1.Press the Menu or Select buttons to enter the Menu structure.

2.Navigate to the desired menu.

3.	Press the remote control		and	arrows to highlight the
	desired menu item.
4.	When the desired menu item is highlighted, press the				arrow
	or SELECT button to select the highlighted item. If an option is
	selected, another menu opens. When an adjustable parameter is
	selected, the current selection will blink to indicate that it is
	selected. Use the	and	arrows to scroll through the available
	options for the selected parameter. When the desired parameter
	option is highlighted, press the			arrow on the remote control to
	select the option.

Note: A brief description of each function is given in the table but refer to the Table of Contents for additional information on each function. For additional information on using and programming the remote control, refer to Appendix C.

2-12