Lexicon RV Receiver manual RV-5 Menu Overview, Menu Navigation, Exit

MAIN MENU

AUDIO CONTROLS VIDEO STATUS SETUP

Basic Operation Lexicon

RV-5 MENU OVERVIEW

When the remote control touch screen is in the “LEX”, “TUNER”, or “ZONE 2” menu layers, pressing MENU or SELECT on the RV-5 remote control accesses the menu controls for the RV-5 Receiver. The MAIN MENU is the root directory

of the RV-5 menu structure and has three branches: AUDIO CONTROLS, VIDEO STATUS, and SETUP.

Note: The DVD menu layer of the touch screen controls the Lexicon RT-20 and RT-10, if installed.

The AUDIO CONTROLS menu controls the audio-specific parameters, such as treble and bass, as well as providing an audio status menu. Refer to Section 4: Audio Controls & Video Status for more information.

The VIDEO STATUS menu is an information-only menu identifying the current video status of the RV-5 Receiver. For more information, refer to Section 4: Audio Controls & Video Status.

The SETUP menu controls all aspects of setting up the RV-5 Receiver. Refer to Section 3: Setup for more information.

The RV-5 menu structure can be viewed on the OSD (On-Screen Display), which is a 480i or 480p video output signal to your monitor, or on the front panel 2-line display, which displays the menus one line at a time using the remote control navigation controls. The front panel 2-line display can also be viewed on the OSD, in 480i resolution only.

Note: When the RV-5 menu structure is entered, most front panel buttons and the remote control buttons are disabled until the menu structure is exited. The exceptions are the Volume Knob and Standby Button on the front panel and the remote control Volume, Mute, and OFF buttons. Note also that the disabled condition of the remote control only affects the “LEX”, “TUNER”, and “ZONE 2” menu layers.

MENU NAVIGATION

Use the remote control arrow buttons to navigate the RV-5 menu structure, shown in detail in Appendix B. The Command Matrix Table, located later in this chapter, indicates the navigation commands that the remote control buttons perform when the RV-5 command bank is activated by selecting the “LEX”, “TUNER”, or “ZONE 2” options on the remote control touch screen.

Arrow	Navigation Functions
	(for “LEX”, “TUNER”, and “ZONE2” menu layers)
	When a menu is open, press the remote control		arrow to
	select the highlighted menu parameter. The menu parameter
	will blink to indicate that it is selected.
	When a menu is open, press the	arrow to close the menu and,
	in most cases, open the previous menu. Subsequent presses
	continue to close the current menu and open the previous menu
	until the MAIN MENU is closed.
	When a menu is open, press the	and arrow buttons to scroll
	upward and downward through the complete list of menu param-
	eters. The highlighted menu item appears in the front panel
	display. All menu items appear in the OSD. The cursor
	automatically wraps to the next menu parameter when the first or
	last menu item is passed.
	When a menu parameter is selected and blinking, press the and
	arrow buttons to scroll through the available parameter
	options.
SELECT	Press the SELECT button to open the menu structure, open a
	menu branch, or select a menu parameter.
MENU	Press the MENU button to open the menu structure.
EXIT	When the menu is open, press the EXIT button to leave the menu.
	Unlike the arrow button which closes a menu layer, the EXIT
	button completely closes the menu structure.

2-10