Lexicon RV Receiver manual Zone 2 OFF Button, Main Zone OFF Button, Mute Button, Mode Buttons

Basic Operation Lexicon

pressing a Zone 2 input selection button activates the corresponding input in Zone 2.

When the RV-5 is in Standby, pressing a Zone 2 input selection button powers on the RV-5, selects the input in Zone 2, and turns off the Main Zone.

7 ZONE 2 OFF BUTTON

Deactivates Zone 2. When Zone 2 is off, the Zone 2 OFF button on the front panel lights red.

8 MAIN ZONE OFF BUTTON

Deactivates the Main Zone. When the Main Zone is off, the Main Zone OFF button on the front panel lights red.

Note: Activating the Main Zone OFF button on the front panel turns off the audio, however the video continues to be output through both the analog and HDMI video outs. If using the HDMI Video In connection, only the HDMI video is output. If the analog Video In is used, then both analog and HDMI video is output. Main Zone OSD (On-Screen Display) menus are also still available.

9 MUTE BUTTON

Mutes the Main Zone and Zone 2 volumes. Press the MUTE button to mute the Main Zone volume level; “MUTE ON” appears in the 2-line front panel and OSD displays. Press the MUTE button again to restore the volume to its original level. If a front panel Zone 2 input button is held down, then pressing the MUTE button on the front panel will mute the Zone 2 output.

On the remote control, pressing the volume button once on the remote while the volume is muted, turns off mute. Pressing and

holding the Volume button, while the sound is muted, resets to the original pre-mute volume level, as displayed on the 2-line display, and then increases or decreases the volume from that point, turning off mute.

The LED in the MUTE button lights red when the Main Zone mute is active, green when the Zone 2 mute is active, and amber when both Zones are muted. The volume can also be muted by using the MUTE button on the remote control, which functions in the same manner. However, the remote only mutes Zone 2 if the touch screen is in the “Zone 2” menu layer.

10 MODE BUTTONS

Use the Mode buttons to scroll to the previous ( ) or next ( ) available listening mode. Scrolling the Mode button reveals the entire list of listening modes available for the currently selected input and mode family. For more information on selecting listening modes, refer to Section 3: Setup.

11 ON/STANDBY BUTTON

Toggles the RV-5 between On and Standby. The rear panel Power Switch must be set to the ON position for the Standby button to be active. When the RV-5 is in the standby mode, pressing the Standby button turns the unit on and changes the light in the Standby button from red to blue. Power is still supplied to the RV-5 when standby mode is activated.

When the rear panel Power Switch is set to the ON position or AC power is applied or restored, the RV-5 automatically enters the standby mode.

Note: When taken out of standby, the RV-5 activates the Zone inputs that were active in the previous operating session.

2-4